Utax P-C2160DN User Manual Download

Page: 34 / 226

Printing Operation

2-8

E-mail settings

By configuring the SMTP settings, you can send E-mail notifications on
completed jobs.

To use this function, this machine must be connected to a mail server
using the SMTP protocol.

In addition, check the following.

• The network environment used to connect this machine to the mail

server
A full-time connection via a LAN is recommended.

• SMTP settings

Use Embedded Web Server RX to register the IP address or host
name of the SMTP server.

• If limits have been set on the size of E-mail messages, it may not be

possible to send very large E-mails.

The procedure for specifying the SMTP settings is explained below.

Access Embedded Web Server RX by referring to

Accessing

Embedded Web Server RX on page 2-5

From the

Function Settings

menu, click

E-mail

Summary of Contents for P-C2160DN



































































































































































































































Search results

Summary of Contents for P-C2160DN

Reviews:

Related manuals for P-C2160DN

Brands by name

Popular brands

Utax P-C2160DN, User Manual

Search results

Summary of Contents for P-C2160DN

Reviews:

Related manuals for P-C2160DN

Brands by name

Popular brands