Utax P-C2160DN User Manual Download

Page: 46 / 226

Printing Operation

2-20

Printing from Application Software

The steps required to print a document created with an application are
explained below.

Load the paper required into the paper cassette.

From the application File menu, select

Print

. The Print dialog box

displays.

Select the printer to be used from the printer list.

Use

Number of copies

to enter the number of prints required.

To start printing, click

Printing by AirPrint

AirPrint is a printing function that is included standard in iOS 4.2 and later
products, and Mac OS X 10.7 and later products.

This function enables you to connect and print to any AirPrint compatible
device without installing a printer driver.

To allow the machine to be found when printing by AirPrint, you can set
machine location information in Embedded Web Server RX.

For details, refer to the

Embedded Web Server RX User Guide

Note

For information on how to use the printer driver software,

refer to

Printing System Driver User Guide.

Summary of Contents for P-C2160DN



































































































































































































































Search results

Summary of Contents for P-C2160DN

Reviews:

Related manuals for P-C2160DN

Brands by name

Popular brands

Utax P-C2160DN, User Manual

Search results

Summary of Contents for P-C2160DN

Reviews:

Related manuals for P-C2160DN

Brands by name

Popular brands