Utax P-C3060 Operation Manual Download

Page: 111 / 409

3-11

Preparation before Use > Loading Paper

Specify the media type.

[

▲

] [



] key > [

Cassette 1 (to 4) Type

] > [

] key

Select the media type, and select the [

] key.

Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting)

Specify the paper size and media type of paper to be used in the multi purpose tray.

Display the screen.

[

System Menu/Counter

] > [

▲

] [



] key > [

Common Settings

] > [

] key > [

▲

] [



] key >

[

Orig./Paper Set.

] > [

] key > [

▲

] [



] key > [

MP Tray Set.

] > [

] key

Specify the paper size.

[

▲

] [



] key > [

MP Tray Size

] > [

] key

Select the paper size, and select the [

] key.

Specify the media type.

[

▲

] [



] key > [

MP Tray Type

] > [

] key

Select the media type, and select the [

] key.

Item

Description

MP Tray Size

Available options are as follows:

Value

: A4, A5, A6, B5, B6, Folio, 216 × 340 mm, Letter, Legal, Statement, Executive, Oficio II,

16K, ISO B5, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch, Envelope DL,
Envelope C5, Hagaki (Cardstock), Oufuku Hagaki (Return postcard), Youkei 4, Youkei 2,
Custom

*1 For instructions on how to specify the custom paper size, refer to the following:

Custom PaperSize (page 8-9)

MP Tray Type

*2 To change to a media type other than "Plain", refer to the following:

MP Tray Set. (MP Tray Settings) (page 8-11)

Select the media type.

Values

: Plain (60 to 105 g/m

), Transparency, Rough, Vellum (60 to 105 g/m

), Labels, Recycled,

Preprinted

, Bond, Cardstock, Color, Prepunched

, Letterhead

, Envelope,

Thick (106 to 220 g/m

), Coated, High Quality, Custom 1-8

*3 To print on preprinted or prepunched paper or on letterhead, refer to the following:

SpecialPaper Act. (page 8-10)

NOTE

• The available media types for printing received faxes are as shown below.

Plain, Label, Recycled, Bond, Vellum, Color, Envelope, Cardstock, Coated, Thick, High Quality, Rough and Custom
1 to 8

• Set the paper size of the multi purpose tray used for fax reception as follows:

Inch models: Letter, Legal, Statement
Metric models: A4, B5, A5, Folio
If the above setting is changed, it will not be possible to print faxes.

Summary of Contents for P-C3060


























































































































































































































































































































































































































Search results

Summary of Contents for P-C3060

Reviews:

Related manuals for P-C3060

Brands by name

Popular brands

Utax P-C3060, Operation Manual

Search results

Summary of Contents for P-C3060

Reviews:

Related manuals for P-C3060

Brands by name

Popular brands