Utax P-C3570DN User Manual Download

Page: 36 / 255

Printing Operation

2-9

Enter the appropriate values to each field.

Setting

Description

SMTP

Set to send e-mail from the machine.

SMTP Protocol

Set SMTP protocol. Set the

SMTP (E-mail TX)

setting to

the

Protocol Settings

page.

SMTP Server
Name

Enter the host name or IP address of the SMTP server.

SMTP Port
Number

Specify the port number to be used for SMTP. Use the SMTP
default port 25.

SMTP Server
Timeout

Set the amount of time to wait before time-out in seconds.

Authentication
Protocol

Set whether SMTP authentication is used. To use
authentication, enter the user information for authentication.

SMTP Security

Set SMTP security.
Turn on

SMTP Security

SMTP (E-mail TX)

on the

Protocol Settings

page.

POP before
SMTP Timeout

Specify the time in seconds until the connection to the POP
server times outs. This can be set when

POP before SMTP

selected in

Authentication Protocol

Connection Test

Tests to confirm that the settings are correct.

Domain
Restriction

Set whether or not domains are restricted. Click the

Domain

List

and enter the domain names of addresses to be allowed or

rejected. Restriction can also be specified by e-mail address.

POP3

Set to receive e-mail at the machine.

POP3 Protocol

Set POP3 protocol. Set the

POP3 (E-mail RX)

setting to

the

Protocol Settings

page.

Check Interval

Specify the interval for checking for incoming e-mail in minutes.

Run once now

Click

Receive

to connect to the POP3 server immediately and

check for incoming E-mails.

Domain
Restriction

Set whether or not domains are restricted. Click the

Domain

List

and enter the domain names of addresses to be allowed or

rejected. Restriction can also be specified by e-mail address.

POP3 User
Settings

Configure the settings for POP3 user accounts and the POP3
server. You can configure up to three users.

Summary of Contents for P-C3570DN
































































































































































































































































Search results

Summary of Contents for P-C3570DN

Reviews:

Related manuals for P-C3570DN

Brands by name

Popular brands

Utax P-C3570DN, User Manual

Search results

Summary of Contents for P-C3570DN

Reviews:

Related manuals for P-C3570DN

Brands by name

Popular brands