Utax P-C3570DN User Manual Download

Page: 54 / 255

Printing Operation

2-27

For more information about configuring settings, refer to

Sleep Timer

(Sleep timer timeout time) on page 4-94

Energy Saver Mode

This mode reduces power consumption even more than quick recovery
mode, and allows Sleep mode to be set separately for each function.

To use the printer, press

[OK]

. The printer will be ready to operate within

38 seconds.

For more information on Energy Saver settings, refer to

Sleep Level Set.

(Sleep level setting) on page 4-92

Note

If the Low Power Timer is equal to the Sleep Timer, a Sleep mode

is preceded.

Summary of Contents for P-C3570DN
































































































































































































































































Search results

Summary of Contents for P-C3570DN

Reviews:

Related manuals for P-C3570DN

Brands by name

Popular brands

Utax P-C3570DN, User Manual

Search results

Summary of Contents for P-C3570DN

Reviews:

Related manuals for P-C3570DN

Brands by name

Popular brands