manualshive.com logo in svg

Utax P-C4580DN, User Manual

The Utax P-C4580DN is a high-performance printer designed for professional use. For detailed instructions on setup, operation, and maintenance, refer to the comprehensive User Manual available for free download at 88.208.23.73:8080 - ensuring you make the most of this exceptional product.

Share
Download
background image

vi

Monotype Imaging License Agreement

1

Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as 
well as the UFST Software.

2

You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions 
of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal 
purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this 
License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts 
on more than three printers, you need to acquire a multi-user license agreement which can be obtained from 
Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights 
are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.

3

To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary 
information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to 
and use of the Software and Typefaces.

4

You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree 
that any such copy shall contain the same proprietary notices as those appearing on the original.

5

This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License 
may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not 
remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you 
shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as 
requested.

6

You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.

7

Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with 
Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. 
Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.

The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular 
purpose and merchantability, are excluded.

8

Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is 
repair or replacement of defective parts, upon their return to Monotype Imaging.

In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, 
or any damages caused by abuse or misapplication of the Software and Typefaces.

9

Massachusetts U.S.A. law governs this Agreement.

10

You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written 
consent of Monotype Imaging.

11

Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data 
and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. 
Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in 
FAR 52.227-19 (c)(2).

12

You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and 
conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No 
change in this Agreement is effective unless written and signed by properly authorized representatives of each party. 
By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Summary of Contents for P-C4580DN









































































































































































































































































































































































Reviews:

No comments

Related manuals for P-C4580DN

Z Corporation ZPrinter 650 Hardware Manual preview
ZPrinter 650
Brand: Z Corporation Pages: 99
Oki MC560n Specifications preview
MC560n
Brand: Oki Pages: 4
Olivetti ARTJET 20 User Manual preview
ARTJET 20
Brand: Olivetti Pages: 22
Xiamen PAPERANG MonoSnap Lite User Manual preview
PAPERANG MonoSnap Lite
Brand: Xiamen Pages: 7
Oki MC363DN Manual preview
MC363DN
Brand: Oki Pages: 24
Ricoh Aficio AP3200 Operating Instructions Manual preview
Aficio AP3200
Brand: Ricoh Pages: 140
Xerox WorkCentre XD Series User Manual preview
WorkCentre XD Series
Brand: Xerox Pages: 63
Oki 4465873A Setup Manual preview
4465873A
Brand: Oki Pages: 3
Evolis Zenius User Manual preview
Zenius
Brand: Evolis Pages: 63
Lexmark XS790 Series Brochure & Specs preview
XS790 Series
Brand: Lexmark Pages: 8
SEH SEH InterCon PS54a-G Hardware Installation Manual preview
SEH InterCon PS54a-G
Brand: SEH Pages: 24
VORON STEALTHBURNER Manual preview
STEALTHBURNER
Brand: VORON Pages: 73
Kyocera 5003i Operation Manual preview
5003i
Brand: Kyocera Pages: 708
Olivetti PR2 E Service Manual preview
PR2 E
Brand: Olivetti Pages: 149
NBS Technologies Advantage M8 Operation Manual preview
Advantage M8
Brand: NBS Technologies Pages: 64
Agilent Technologies 8700 LDIR Long Term Shut Down And Start Up Instructions preview
8700 LDIR
Brand: Agilent Technologies Pages: 2
B-G Instruments PM1416 Quick Start Manual preview
PM1416
Brand: B-G Instruments Pages: 2
Sam4s giant 100 series User Manual preview
giant 100 series
Brand: Sam4s Pages: 54

Brands by name

Popular brands

Load more brands