Utax P-C4580DN User Manual Download

Page: 315 / 360

8-39

Troubleshooting

Center-Folding Unit (Option)

Ejection Section

Lift up the folding tray and remove any jammed paper.

Push the folding unit release lever and pull out the folding unit.

Press the release lever, open the left cover of the center fold unit, and
remove the jammed paper.

Turn feed knob D9 until the jammed paper is in a location where it is
easy to remove.

Close the folding unit left cover.

Open the folding unit top cover and remove the paper jam.

Turn feed knob D9 until the jammed paper is in a location where it is
easy to remove.

Close the folding unit top cover, and return the folding unit to its
original position.

Summary of Contents for P-C4580DN









































































































































































































































































































































































Search results

Summary of Contents for P-C4580DN

Reviews:

Related manuals for P-C4580DN

Brands by name

Popular brands

Utax P-C4580DN, User Manual

Search results

Summary of Contents for P-C4580DN

Reviews:

Related manuals for P-C4580DN

Brands by name

Popular brands