manualshive.com logo in svg

UTC RETAIL 3170 Series, Installation Manual

The UTC RETAIL 3170 Series is a cutting-edge retail solution. Easily set up and configure your system with the comprehensive Installation Manual, available for free download from our website. Get step-by-step instructions on maximizing the potential of this powerful product.

Share
Download
background image

 

11823040 Rev A

 

4 

© 2013 UTC RETAIL 

COM2 uses pins 7-12. The drawing’s left side is the rear of the motherboard; pin 1 on each 
terminal block is indicated by the small circle on the board. Now use the tables seen below to 
select the jumper setting for JP3 or JP4. For +5V COM1, move the jumper to 3-4 location, for 
COM2, move the jumper to the 9-10 location. For +5V COM3, jumper 1-2 on JP4; for COM4, 
jumper 5-6.  

 

 

 

 

Summary of Contents for 3170 Series










Reviews:

No comments

Related manuals for 3170 Series

barclaycard Countertop Quick Set-Up Manual And Fast Facts Manual preview
Countertop
Brand: barclaycard Pages: 2
Allegion Interflex IF-57 Series Manual preview
Interflex IF-57 Series
Brand: Allegion Pages: 22
C-Data FD704GW User Manual preview
FD704GW
Brand: C-Data Pages: 21
Tep Ex SKX 16/E User Manual preview
SKX 16/E
Brand: Tep Ex Pages: 15
Orderman COLUMBUS 300 Quick Installation Manual preview
COLUMBUS 300
Brand: Orderman Pages: 2
wallee PAX A920Pro User Manual preview
PAX A920Pro
Brand: wallee Pages: 6
wallee Yomani User Manual preview
Yomani
Brand: wallee Pages: 15
Dahua ASA1222G-D Quick Start Manual preview
ASA1222G-D
Brand: Dahua Pages: 22
UIC PP790SE Installation Manual preview
PP790SE
Brand: UIC Pages: 2
PairGain PG-Flex FRC-753 4B Manual preview
PG-Flex FRC-753 4B
Brand: PairGain Pages: 16
POSBank ANYSHOP e2 D25 User Manual preview
ANYSHOP e2 D25
Brand: POSBank Pages: 150
National Instruments SCXI-1305 Installation Manual preview
SCXI-1305
Brand: National Instruments Pages: 14
ParTech K3623-02 Installation And Setup Instructions preview
K3623-02
Brand: ParTech Pages: 7
ZKTeco SpeedFace M4 User Manual preview
SpeedFace M4
Brand: ZKTeco Pages: 82
JARLTECH 8100p series   Operation Manual preview
8100p series  
Brand: JARLTECH Pages: 45
FingerTec FACE ID 2 Quick Start Manual preview
FACE ID 2
Brand: FingerTec Pages: 5
MEI CONLUX MCM5 Installation Manual preview
CONLUX MCM5
Brand: MEI Pages: 2
Phistek P121VG User Manual & Installation Manual preview
P121VG
Brand: Phistek Pages: 10

Brands by name

Popular brands

Load more brands