UH-2VE-8K: 8K60 1x2 HDMI 2.1 Splitter
U.T.E. electronic GmbH & Co. KG
7
www.ute.de
5 Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
Step1.
Connect the splitter to the PC with USB cable (not included).
Step2.
Power on the splitter, and then the PC will automatically detect a U-disk named
of “BOOTDISK”.
Step3.
Double-click to open the U-disk, a file named of “READY.TXT” will be showed.
Step4.
Copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk directly.
Step5.
If the filename “READY.TXT” automatically turns to “SUCCESS.TXT”, the
firmware was upgraded successfully. If the firmware upgrade failed, please
check the file (.bin) and then follow the above procedure to operate again.
Step6.
Remove the USB cable after firmware upgrade.
