background image

UH-2VE-8K: 8K60 1x2 HDMI 2.1 Splitter                                                     

 

U.T.E. electronic GmbH & Co. KG   

 

 

 

 

 

 

  www.ute.de 

Statement 

Thanks for purchasing this product, please read this user manual carefully before using 
this product. Pictures are shown in this manual for reference only. Different models and 
specifications are subject to real product.   

This manual is only for operation instruction, please contact the local dealer for 
maintenance assistance. The functions described in this version are updated till Mar, 
2021. In the constant effort to improve our product, we reserve the right to make 
functions or parameters changes without notice or obligation. Please refer to the 
dealers for the latest details. 

All product function is valid till 2021-03-03.

 

 

Trademarks 

Product model and logo                  are trademarks of U.T.E. electronic GmbH & Co. KG. 
Any other trademarks mentioned in this manual are acknowledged as the properties of 
the trademark owner. No part of this publication may be copied or reproduced without 
the prior written consent. 

 

FCC Statement 

This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. It has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a commercial 
installation. 

Operation of this equipment in a residential area is likely to cause interference, in which 
case the user at their own expense will be required to take whatever measures may be 
necessary to correct the interference. 

Any changes or modifications not expressly approved by the manufacture would void 
the user’s authority to operate the equipment. 

                 

             

 

 
 

 

Summary of Contents for UH-2VE-8K

















Reviews: