12
Press the button to access the SERVICE menu within which you can perform the following operations:
The entry in the function menu (press "menu" key) gives the possibility to:
•Access the unit configuration menu.
•Access the clock menu.
•Access the alarm menu in progress.
•Access the alarm history menu.
•Display the unit status by consulting the digital and analog inputs / outputs.
•Access the control panel menu.
The Exit button allows you to return to the previous menu level.
CONTROL PANEL - FUNCTIONS MENU
Display service menu
By pressing the USER key, you can access the display menu of the unit status. In this menu the following states are displayed:
- STATE COMPRESSOR
- 3-WAY VALVE STATUS
- STATE PUMP
- VALUATED SOLENOID GAS STATE
- STATE DAMPERS RECIRCULATION
- BY-PASS DAMPER STATE
From the main display by pressing the button it is possible to access the display of the alarms in progress; the alarm status can
be:
Active: if the cause of alarm is still present; in this case the alarm can not be reset
Reset: the cause that generated the alarm is not present; the alarm can be reset.
To reset the alarms, press the RST ALL button (T7) for 2 seconds.
MENU USER
CONTROL PANEL - DISPLAY AND ALARM RESET
Alarm display and reset
Viewing the display menus and information