background image

1

En

Read these precautions carefully before setting up your NS-IC400 speakers.

• When mounting these speakers, be sure to work with two or more persons for safety.

• Do not attach them to thin plywood or soft ceiling surface materials as the screws may tear 

free, causing the speakers to fall and become damaged, or result in personal injury.

• Do not fasten the speakers to a ceiling with nails, adhesives, or other unsafe hardware. 

Long-term use and vibrations may cause them to pull free.

• Do not place the speakers where they are liable to be knocked over or struck by falling 

objects. Stable placement will also ensure better sound performance.

• Do not attempt to modify or fix the speakers. Contact qualified Yamaha service personnel 

when any service is needed. 

• Do not attempt to clean the speakers with chemical solvents as this might damage the 

finish. To clean, wipe with a dry, soft cloth.

• Secure placement or installation is the owner's responsibility. Yamaha shall not be 

liable for any accident caused by improper placement or installation of speakers.

CONSUMER PRECAUTIONS

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying 
documents means that used electrical and electronic products should not 
be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take 
them to applicable collection points, in accordance with your national 
legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable 
resources and prevent any potential negative effects on human health and 
the environment which could otherwise arise from inappropriate waste 
handling.

For more information about collection and recycling of old products, 
please contact your local municipality, your waste disposal service or the 
point of salewhere you purchased the items.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard 
these items, please contact your local authorities or dealer and ask for the 
correct method of disposal.

05+%DQQMࡍ࡯ࠫ㧞㧜㧝㧜ᐕ㧝㧜᦬㧞㧞ᣣޓ㊄ᦐᣣޓඦᓟ㧠ᤨ㧟㧥ಽ

Summary of Contents for NS-IC400












Reviews: