Pg. 7
UM-25
5. Operating Instructions
Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting
head.
ADVANCING & RETRACTING THE TOOL
1. To advance the tool, twist release handle to advance mode then lift and lower pump handle.
2. To retract the tool, twist release handle to retract mode and the blade will retract.
CUTTING
1. Retract the blade fully by by twisting the handle to retract mode.
2. Unlatch the tool head by pulling up on release lever.
3. Close head and latch around material. Be sure tool is completely latched or damage will occur.
4. Make sure all cuts are made perpendicular to the cutting head or damage will occur to blades.
Advance mode
Retract mode
Movable blade
CAUTION: always wear eye protection
while cutting
WARNING:
Hardened material can fly
when cutting. Always point away from
people or objects.
