114
114
The operation of cab:
The operation of cab:
(
(
1
1
)
)
Open left door with key, enter into cab.
Open left door with key, enter into cab.
(
(
2
2
)
)
Close door, make sure left and right doors are closed before beginning work.
Close door, make sure left and right doors are closed before beginning work.
(
(
3
3
)
)
The glass of left and right door can be moved by draw button on the glass.
The glass of left and right door can be moved by draw button on the glass.
(
(
4
4
)
)
The rear door can be opened by loosening lock buckle.
The rear door can be opened by loosening lock buckle.
Disassembling cab:
Disassembling cab:
(
(
1
1
)
)
Stop the truck on solid and smooth level ground; close switch , pull down hand brake.
Stop the truck on solid and smooth level ground; close switch , pull down hand brake.
(
(
2
2
)
)
Remove 4 bolts from left front and right front legs. For high position exhaust, the fastening bolts should be
Remove 4 bolts from left front and right front legs. For high position exhaust, the fastening bolts should be
removed
removed
(
(
3
3
)
)
Pull out 4 rubber plugs from left rear and right rear legs, remove 4 bolts from left rear and right rear legs.
Pull out 4 rubber plugs from left rear and right rear legs, remove 4 bolts from left rear and right rear legs.
(
(
4
4
)
)
Using a crane,
Using a crane, lift the cab
lift the cab slightly
slightly..
(
(
5
5
)
)
Disconnect wiring at switches for fan, wiper, alarm, lights etc. Place
Disconnect wiring at switches for fan, wiper, alarm, lights etc. Place any trailing wires inside cab support
any trailing wires inside cab support legs.
legs.
(
(
6
6
)
)
Put down cab slowly and l
Put down cab slowly and lightly
ightly, avoid crushing
, avoid crushing wires.
wires.
Installing cab:
Installing cab:
The installation procedure is the reverse of the removal procedure. But remove the bolts which connect head
The installation procedure is the reverse of the removal procedure. But remove the bolts which connect head
frame and support legs, after fastening support legs and truck body, then fasten connected bolts connected head
frame and support legs, after fastening support legs and truck body, then fasten connected bolts connected head
frame and support legs, fasten torque of bolts connected support legs and truck body: T=137
frame and support legs, fasten torque of bolts connected support legs and truck body: T=137
--
167 N·m. bolts for
167 N·m. bolts for
connecting head frame and support
connecting head frame and support legs: T=1
legs: T=110
10
--
140 N·m
140 N·m
https://www.forkliftpdfmanuals.com/
Summary of Contents for UT25C
Page 85: ...79 79 10 Labels 10 Labels https www forkliftpdfmanuals com ...
Page 90: ...84 84 7 7 Tip Over Warning Label Tip Over Warning Label https www forkliftpdfmanuals com ...
Page 119: ...113 113 https www forkliftpdfmanuals com ...
Page 139: ...133 133 IMPCO Single Fuel System IMPCO Single Fuel System https www forkliftpdfmanuals com ...