background image

CAUTION:

 This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt  RSS standard(s). Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and (2) this device must accept  any interference received, including interference that may cause undesired operation. 

 approved by the party responsible for compliance could void the user’s authority to operate the equipment. 

WARNING

1. This headlamp projects a very bright beam of light. For eye protection, do not look directly into the light.

2. This product is powered by a lithium-ion rechargeable battery. Never expose the battery to any liquid or fire.

3. Never disassemble the unit or attempt to remove battery, as that could cause leakage of alkaline solution or other electrolytic substance.

4. Never use or charge the battery if it appears to be leaking, discolored, deformed or abnormal.

5. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste or in a fire.

SAFETY INFORMATION

BLUETOOTH OPERATION
1 STREAMING AUDIO WIRELESSLY USING A BLUETOOTH DEVICE

To wirelessly stream audio to this headlamp from a Bluetooth-enabled device:

Press and hold the button (1) to turn on the Buletooth and the Bluetooth LED (4) will begin flashing blue.

Place a Bluetooth-capable device in the pairing mode. Use the device’s Bluetooth pairing menu to pair with this headlamp (Pairing name: 

LED HEADLAMP).

When the Bluetooth LED (4) illuminates blue continually, it is paired with the device and you can stream audio via Bluetooth from your device 

to the headlamp.           

2 DISCONNECTING A BLUETOOTH DEVICE

Press and hold the button (2) & (3) together to disconnect a Bluetooth device. 

To pair this headlamp with a different Bluetooth-enable device, repeat Step 1 

with the new device. 

The bluetooth LED will turn off automaticlly if there is no connecting within 

about 15 minutes.

CHARGING OPERATION

+ 40°C / 

+ 104°F

+ 0°C / 

+ 32°F

Note: Charging while using a USB wall adaptor will be faster than a computer USB port.

*

Remove USB cable from the device once LED changes 

from solid red to red flashing and close USB door.

2000mAh Rechargeable Battery

USB 5V

(not included)

(not included)

IMPORTANT:

 The speaker will play continous “beep” 

sounds when the power is low. The Bluetooth LED will then 
turn off automatically. When this occurs, you must charge the 
Bluetooth headlamp.



Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   

Consult the dealer or an experienced radio/TV technician for help. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reviews: