Lineman driven. Field proven.
U
TILITY
S
OLUTIONS
™
Phone (828)323-8914
Fax
(828)323-8410
sales@utilitysolutionsinc.com
Web
www.utilitysolutionsinc.com
101 33
rd
Street Drive SE · Hickory, NC 28602
Electric Meter Jumper Leads
USJL-001 Manual Rev. 1.5 (3-6-14)
USJL-001 Electric Meter Jumper Leads - Ferrule End
Operation Manual
Our Electric Meter Jumper Lead sets are a convenient and safe method to prevent a customer outage during
meter removal or change-out.
The USJL-001 Electric Meter Jumper Lead Set has a maximum
rating of 200 Amps and 240 Volts AC when attached in parallel
(each individual lead has a maximum of 100 Amps).
USJL-001 has a ferrule connector and can only be attached to
meter sockets with horn bypass lugs. Horn bypass lugs are a
factory installed residential socket option. The horn bypass lugs
consist of specially designed lugs with metal tangs that act as
attachment points for insulated jumper leads.
The lack of exposed metal on the USJL-001 provides a
substantial level of safety for the operator.
Product Line
USJL-001 Ferrule Connection for Bypass Horn Lugs
USJL-002 Ferrule Connection for Bypass Horn Lugs w/ 100 Amp Breaker
USJL-003 Alligator Clamp Connection for Standard Lugs
USJL-004 Alligator Clamp Connection for Standard Lugs w/ 100 Amp Breaker
!
!
WARNING
Carefully read and fully understand this manual
prior to operating, maintaining or testing
this device. Improper operation, handling or
maintenance of this device can result in death,
grievous personal injury and or equipment damage.
!
!
WARNING
Follow safe work procedures and practices
when utilizing this device. Follow all existing
codes, requirements and instructions for all
equipment used in conjunction with this device.
!
!
WARNING
The Electric Meter Jumper Lead Set is to be used in a
temporary capacity only. Do not utilize the tool in a
permanent capacity or for extended periods of time.
!
!
WARNING
The Electric Meter Jumper Lead Set is
not waterproof. Do not use this device
in wet conditions.
