5
Remote Controller Only
9.
Reset
button:
Press to cancel all current settings and return the controller
to factory settings.
10.
Lock
button:
Press to lock all current settings and temporarily disable all
buttons except the
Lock
button. This prevents settings from
being changed accidentally. When the lock function is
active, a lock symbol appears on the remote controller
display. Press again to cancel the lock function.
11.
LED Display
button:
Press to clear and reactivate the unit display.
12.
ION
button:
Press to activate or deactivate the ion function.
Remote Controller Operation
• For best results, use the remote controller within 26’ of the
unit, pointing it toward the signal receiver. Signal reception is
confirmed by a beep.
• The remote controller is operates using two AAA batteries
(included) housed in the back of the remote.
Cool Mode
1. Press the
Mode
button until the cooling indicator light illuminates.
2. Press the
Up
or
Down
button to raise or lower the set temperature by 2ºF within the range of
62 to 88ºF (17 to 31ºC).
3. Press the
Fan
button to select the fan speed.
Fan Mode
1. Press the
Mode
button until the fan indicator illuminates.
2. Press the
Fan
button to select the fan speed. The temperature cannot be adjusted in fan mode.
Dehumidifying Mode
1. Press the
Mode
button until the dehumidifying indicator illuminates.
2. The temperature and fan speed cannot be adjusted in dehumidifying mode. The fan
automatically operates on low speed.
Auto Mode
1. Press the
Mode
button until the auto indicator illuminates.
2. The unit automatically selects between cooling and fan operation to meet the set temperature.
The fan speed cannot be adjusted in auto mode.
Unit and Remote Functions
Operating Instructions
9
12
1
8
5
7
6
2
3
4
10
11
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING
TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
ION
SET TEMPERATURE( F)
LED
DISPLAY
Summary of Contents for Portable A/C
Page 8: ......
