2
Installation
Control Panel
1.
Continuous
mode light: Indicates the dehumidifier is operating in continuous mode.
2.
Cont.
button: Press to activate or deactivate continuous operation mode.
3.
Comfort
mode light: Indicates the dehumidifier is operating in comfort mode.
4.
Comfort
button: Press to activate or deactivate the comfort mode.
5.
Filter
light: Indicates that the filter needs to be cleaned.
6.
Filter
button: Press to reset the Filter light after cleaning the filter.
7.
Turbo
light: Indicates the fan speed is set to Turbo (high).
8.
Turbo
button: Press to activate or deactivate the Turbo fan speed.
9.
Power
button: Press to turn the dehumidifier ON or OFF.
10.
Up
button: Press to set a higher humidity or timer value.
11. Digital display: Displays the selected humidity level or auto-start/stop time while setting. The default display shows
ambient humidity level (between 30 percent and 90 percent) while the unit is ON.
12.
Down
button: Press to set a lower humidity or timer value.
13.
Full
light: Indicates the water tank is full and needs to be emptied.
14.
Defrost
light: Indicates the auto-defrost function is active.
15. Timer
On
and
Off
lights: Indicates auto-ON and auto-OFF settings are programmed.
16.
Timer
button: Press to activate or deactivate the timer function and to program the auto-ON and auto-OFF settings.
2
3
4
5
7
6
8
10
13
9
14
15
16
12
11
1
1. Position the unit upright on a level, stable surface to minimize noise and vibration.
2. Close all doors and windows in the area. The unit is most effective in an enclosed space.
3. Plug the unit into a 120-volt power source.
