32
33
ENTERING LETTERS,
NUMBERS & SYMBOLS
MAKING A CALL THROUGH
THE CONTACT LIST
NUMERIC MODE
Allows you to enter numbers.
1.
Press the Right Soft Key [Options], “Entry Mode,” then “123.”
2.
To enter a number, press its digit key.
SYMBOL MODE
Allows you to enter symbols.
1.
Press the Right Soft Key [Options], “Entry Mode,” then
“Symbol.”
2.
Select the symbol you want to enter with the Navigation Key ,
then press the OK Key .
ONE-TOUCH/TWO-TOUCH DIALING
Ideal for frequently dialed numbers, this feature allows entries in your
contact list to be dialed via the keypad with only one or two key presses.
In order for One-Touch/Two-Touch Dialing to properly work, it must be
enabled. To activate this function, press the OK Key [Menu],
, , , then select On or Off using the Navigation Key .
Press the Left Soft Key [Save].
ONE-TOUCH DIALING
2-9: Press and hold the corresponding memory number for more than 1
second.
TWO-TOUCH DIALING
10-99: Press and the first digit and second digits of the memory number
short and long respectively.
• If no phone number is stored in the location entered, ”Location is empty”
will appear on the screen.
• If One Touch Dial is set to Off:
Enter the speed dial location number then press the SEND Key .
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned.
To assign a speed dial location, please see page 38.
Note
Summary of Contents for CDM7026
Page 48: ...94 95 MEMO CHAPTER 7 GALLERY CHAPTER 7 GALLERY...
Page 72: ...142 MEMO...
