MENU FUNCTION
SETTINGS
60
SETTINGS
MENU FUNCTION
61
Your phone displays a message asking to pair with your
PC or laptop. Select OK and enter the same password
entered on your PC.
Select Ask always or Always connect on your phone,
and select OK. The message Port enabled is displayed
on the phone confirming the pairing. All services such
as Dial up Networking (DUN) are available on the
phone.
Available services are also listed on your PC or laptop.
Select services you want to use with your phone.
If your phone is connected to a laptop or PC using
Bluetooth, you cannot use the USB cable.
To use the USB cable, go to the Bluetooth menu, select the
laptop or PC connected to your phone and then disable the
port using the applicable softkey.
Unpairing a Bluetooth connection
To successfully unpair a Bluetooth connection, you must unpair
both the phone and the PC or laptop. To unpair the connection,
do the following:
To unpair the connection from the phone, scroll to
the name of the PC and select OK. The message Port
disabled is displayed on the phone confirming the
unpairing.
Follow the Bluetooth instructions on you PC or laptop,
or the Bluetooth dongle instructions for unpairing the
PC or laptop from the phone. A dongle is a small USB
device added to a PC or laptop that does not have a
built-in Bluetooth connection. PC, laptop, and dongle
products have website support for Bluetooth
connectivity.
Select Ask always or Always connect on your phone,
and select OK. The message Port enabled is displayed
on the phone confirming the pairing.
Bluetooth pairing from PC to phone
To initialize a Bluetooth connection from your PC or laptop to your
phone, do the following:
To enable Bluetooth on your phone, press
[MENU],
then press the Navigation Key
right 2 times for the
“Settings & Tools” menu. Press
for Bluetooth
Menu. To select On, press the left soft key. The
Bluetooth icon
is displayed in the upper right
corner of the main display left the battery icon when
Bluetooth is enabled.
In the Bluetooth menu, select Options with the right
softkey.
Scroll to Discovery Mode and select OK.
Scroll to On and select OK. Your phone is in
discoverable mode by other Bluetooth devices for one
minute.
Press the End key once, or the Clear key twice to return
to the standby mode.
The phone must be in the standby mode to pair with
another device.
From your PC, search for Bluetooth devices. A list of
devices shows the CDM-8960 or the name you selected
for your phone.
Select your phone from the list of found devices and
enter the password.
Summary of Contents for CDM8960
Page 90: ...MEMO 180...
