Chapter 4 Other Configuration
39
4.8 ROUTING CONFIGURATION
Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN.
This specifies that all packets destined for a particular network or subnet use a predetermined gateway.
To add a static route to a specific destination IP on the local network, click the
Routing
button on the left-side of
the main window.
IP Route Table window
To add a static route to a specific destination IP on the local network, enter a
Destination
IP address, select a
suitable
Netmask
, and type in the
NextHop
. Click
Apply
to enter the new static route in the table below. The route
becomes active immediately upon creation.
