background image

1.  Foreword

2. Working principle

3. Technical parameters

10μm  

100μm

 

 

 

Micro fog

 

 

 

Dry fog

(smaller than 10μm) 

 

Fog

(10μm~100μm) 

Small raining

(0.3mm~1.0mm) 

 

Super micro fog

Fog-raining 

(10μm~100μm) 

Thin fog

300μm

1000μm

Middle fog

Common raining-big raining

(over 1.0mm) 

Thick fog

“Dry fog” effect reference attached diagram

Parameter

Value

Description

Spray particle diameter

10 µm 

Spray particle volume

16ml/min 

Default speed 16, user is not
recommended to modify

Each full bottle can spray 200m³

Reagent

Hydrogen peroxide solution

Control system

Touch screen

Delayed start time function, timer
function,  adjustable sterilization
volume, parameters memory
function, built in calculation
software

It is recommended to use
dedicated disinfectant
solutions for best effect

Sterilization volume

Reach up to 5-500m³ 

Sterilization effect

Max Log6  kill rate 

Power supply

AC 220V / 110V

Choose different voltage types

according to user voltage

Test condition 

Laser particle size analyzer

One hour test

18  points  space
disinfection test 

Thank you for using our product, our company will provide you with the best service, and our Dry 
fog hydrogen peroxide disinfector is easy to use, safe and reliable. This manual contains detailed 
information on how to use the sprayer, equipment management personnel, and operators must 
fully read this manual prior to use, it provides useful information on the operation, care and 
maintenance of the equipment. 

The dry fog hydrogen peroxide disinfector achieves the spray disinfection process by spreading 
cold dry fog to areas that need sterilization. When the average diameter of the droplet is less than 
10µm, the fog can be considered "dry", the dry fog has the below property:

 Dry fog droplets do not settle and exhibits random movement (Brown Principles);

 Dry mist droplets do not converge together to produce large droplets;

 Dry mist droplets bounce on contact with surface, and will not without break nor wet the surface

Because of these properties, the cold and dry fog has an effective surface contact even in 
hard-to-reach places.

Summary of Contents for UVP801C









Reviews:

Related manuals for UVP801C