background image

11. After sales service

10. Notice

 Ensure that the environment is kept relatively clean and, in as much as possible, a low dust 

environment

 After each use, the remaining disinfectant liquid should be disposed of, and if conditions permit, 

use purified water to clean the tubes and nozzles via dry fog spraying

 Wipe the equipment surface clean with purified water after each use

 Avoid using any sharp objects to touch against or rub on the touch screen, to avoid scratching the 

screen

 If any disinfectant liquid flows onto the surface or into the interior of the equipment during use, 

clean it promptly.

 Store equipment in a dry and well ventilated place

 In order to ensure the safety of the user, this product has set up a full safety device. Daily spot 

checks are necessary to ensure the safe use of equipment. Check as required by the specification 
and stop using the device immediately if the problem is identified. In the use of disinfection, or 
equipment regular inspection, the use of 3M8514 welded protective mask (or similar grade 
protective mask). When repairing the equipment, in addition to wearing the above protective mask, 
the equipment should be kept in a well ventilated environment

 Drop off the residual disinfectant after each time use finished, use the purified water to atomizing 

trial wash pipeline and spraying head under the allowed condition for maintenance purpose

9. Daily maintenance

 Do not stay or enter sterilization room when equipment are running

 Vacate all personnel from the area to be sprayed to avoid causing illness or injury

 Ensure that appropriate personal protective gear is worn/used when operating the sterilizer

 Do not use excessive force against the touch screen, do not touch the screen with sharp objects, 

and avoid scratching the surface of the screen.

 One year warranty, lifetime maintenance

 Provide professional supplies, including high-strength composite nozzles and disinfectant bottle

 Each customer is given its own account, and their information

 Regular software updates

 Professional training in hydrogen peroxide disinfection technology

V1/HJ

AEC Lighting Solutions Co., Ltd

Add.: 2548 Bao’an Highway, Jiading District, Shanghai 201801, China 

www.aeclight-reel.com

www.uvpluss.com

Summary of Contents for UVP801C









Reviews:

Related manuals for UVP801C