6
Maintaining and Care for your light
UW Light Dude products are designed to be rugged
and require a minimum of care.
Canister Cap O-ring:
1.
Before latching the canister cap to the
canister the canister cap O-ring should be
inspected for cuts, nicks, cracks, dust, and
debris.
2.
The O-ring should be replaced if cuts, nicks,
or cracks are present.
3.
The O-ring does not require grease or oil. If
grease or oil is used to prolong the life of the
O-ring, excess grease or oil should be
removed with a cloth.
4.
Excessive grease or oil can cause the seal
between the canister and canister cap to be
impaired.
5.
When securing the canister cap to the
canister ensure that wires are completely
inside the canister and that the power
connector (‘s) are lying flat before engaging
the latches.
Summary of Contents for LD-13-DR
Page 1: ...Gen 4 Older Manual ...
Page 2: ...2 ...