09
②
③
①
How to Use/Instructions for Use
1. The default mode is standard after power on. You can press the Mode button
to adjust to strong mode, and then press the button to adjust to smart mode.
Press and hold the Mode button for 3S to enter the dry suction mode, and press
and hold it for 3S to cancel the dry suction mode and enter standard mode.
1. Press the wastewater tank button to remove the tank (Fig. 1)
2. Hold the wastewater tank with one hand and pull out the cover assembly with
the other hand (Fig. 2)
3. After pouring out the wastewater, install the tank back to the body. When there
is a click, the installation is successful (Fig. 3)
2. The machine has its own upright switch when it is turned on. Please use it at
an angle after it is turned on. Do not tilt the machine more than 140°, so as to
avoid leakage of the wastewater tank.
Start working
Pour out wastewater of wastewater tank
Power
button