13
②
①
①
②
①
②
How to Use/Maintenance
Clean wastewater sensor
Self-cleaning
Clean the suction port
I. When the sensor is blocked or the cleaner is shut down, remove the wastewater
tank (Fig.
①
);
II. Clean the wastewater pipe with provided cleaning tool and clean water (Fig.
②
);
III. After cleaning, put back the wastewater tank.
I. After using the machine, put it back on the charging base (Fig.
①
);
II. Make sure that the water volume of the clean water tank exceeds the
self-cleaning water level, there is no wastewater in the wastewater tank, and
press the Self-clean button to start self-cleaning (Fig.
②
);
III. After self-cleaning, please clean the wastewater tank.
I. Remove the Roller brush cover and take out the front Roller brush (Fig.
①
,
②
);
II. Rinse the suction port with clean water;
III. After cleaning, install the Roller brush and the Roller brush cover back to the
machine.
Clean the debris at the rear Roller brush regularly:
Remove the rear Roller brush and use the multi-functional brush to clean the
garbage to avoid affecting the cleaning effect.