40
SCUBAPRO ALADIN 2G
6. Diving with microbubble (MB) levels
MB level is shown by pressing 2x
.
If however a level stop is ignored, the new
MB level is shown (->41).
)
NOTE:
MB levels have an influence on the
dive planner.
6.4 Functions during the dive
with MB levels
6.4.1 Level stop information
MB no-stop time
While diving with MB levels L1 to L5
Aladin 2G will display the MB no-stop time
instead of the ordinary no-stop time. Within
the MB no-stop time no level stops are
required.
“NO STOP” and the MB level symbol
are visible. The remaining MB no-stop time
is shown in minutes.
DEPTH
NO STOP
DIVE TIME
MB no-stop time
Nitrogen loading bar
relative to L0
)
NOTE:
• Information and alarms for MB
no-stop time and ordinary no-stop
time are the same (->27).
• No-stop time relative to L0 is shown
by pressing 3x
(see
)
• Regardless of the MB level, we
generally recommend to perform
a slow ascent during the last few
metres / feet.
Level stop
STOP
NO
CNS O
2
%
DEPTH
DIVE TIME
Deepest level
stop depth
Total time
of ascent
Level stop
duration
Level stop icon
On entering the level stop phase, “NO
STOP” disappears and the arrow
STOP
appears. The
STOP
arrow flashes for 8
seconds and an audible attention beep
goes off. To complete the dive without
cascading to a lower MB level, all requested
level stops must be observed.
The deepest level stop is displayed in
metres (feet). The display “2: 3m ” (“2:
10ft”) means that a level stop of 2 minutes
at a depth of 3 metres (10 feet) has to be
observed. Deco information relative to L0
is shown on an alternate display (see
).
When a level stop has been finished, the
next higher level stop – if present – is
displayed. When all level stops have been
observed, the arrow
STOP
extinguishes and
“NO STOP” reappears. The indication of
time shows the MB no-stop time again.
STOP
CNS O
2
%
DEPTH
DIVE TIME
4s
Level stop ignored
Summary of Contents for Aladin 2G
Page 1: ... Aladin 2G ...
Page 2: ......
