14
MANTIS USER MANUAL
Stopwatch will reset the counted time
when +/UP button is pressed and held.
The laps can be marked by pressing -/
DOWN button when stopwatch is counting.
By doing so the display will freeze for 5
seconds and MANTIS shows the lap time.
Counting will continue automatically and
the lap counter will show the number of
laps at the bottom of the screen.
When stopwatch is stopped you can
review your lap times from the memory by
pressing -/DOWN button.
By pressing SEL button you can exit the
stopwatch and return to the Stopwatch
menu.
F
NOTE: You can leave the stopwatch
actively counting or you can leave the
stopped time on the display. The status
will be stored in memory allowing you
to continue from the same display at a
future time.
F
NOTE: Stopwatch has a 30 minute
timeout before reverting to normal watch
display. However, the timeout does
not stop the stopwatch function. You
can return to the stopwatch menu and
continue with the time taking task just as
you did before the timeout happened.
3.2.2
Reading the altitude, barometer
and temperature values
In the altitude menu the current altitude is
calculated from the barometric pressure
and is shown on the middle row. The
current temperature is shown on the
bottom row. The current altitude class is
shown on the top row.
F
NOTE: barometric pressure is a variable,
changing with weather and atmospheric
pressure at that particular elevation. The
Dive algorithm uses Altitude Classes
which are directly derived from the
barometric pressure. Altitude is counted
from the current barometric pressure and
it is therefore a relative value.
Summary of Contents for MANTIS
Page 1: ... MANTIS User Manual ...
