Refer to
SPECIFICATIONS
for maximum zero range.
NOTE:
-When scale is set at OIML and application is legal for
trade. User only needs to press
ZERO
once when setting
the value to zero. The re-zero function will take place
when reading is stabled
-When scale is set at Normal and application is not legal
for trade. User can set the value to zero at anytime
when pressing
ZERO
5.6 TARE OFF THE WEIGHT OF A CONTAINER
When a container is used, follow the below steps to
manually tare off the weight of container and get the
net weight.
a. Remove all loads away from platter
b. Make sure that the
ZERO INDICATOR
is on
c. Place the container on the platter
d. Press
TARE
After
TARE
is pressed, the
NET INDICATOR
would appear.
Refer to
5.2
for weighing procedures. Weight displayed
under is the net weight of the subject matter. Refer
to
SPECIFICATIONS
for maximum tare range.
NOTE:
- When scale is set at OIML and application is legal
for trade. User only needs to press
TARE
once when tare
off a weight. The tare function will take place when
reading is stabled
- When scale is set at Normal and application is not
legal for trade. User can tare off the weight anytime
when pressing
TARE
5.7 CLEAR THE TARE FUNCTION
a. Remove all loads from platter
b. The tare effect will be cancelled:
-Automatically if automatic tare function is
employed, or
-By pressing
TARE
c. After
TARE
is pressed, the
NET INDICATOR
would
disappear
5.8 MEMORY FUNCTION
5.8.1 Accumulate a Transaction To Memory
a. Refer to
5.2
for weighing producers
b. Press
M+
to save and accumulate data of current