employed, or
-By pressing
TARE
c. After
TARE
is pressed, the
NET INDICATOR
would
disappear
5.8 MEMORY FUNCTION
5.8.1 Accumulate a Transaction To Memory
a. Refer to
5.2
for weighing producers
b. Press
M+
to save and accumulate data of current
transaction to memory
c. Indicator displays ¡
P. X
¡¨ and
M+
INDICATOR
appears
to indicate that memory contains of stored data
d. Indicator returns to normal display status after 2
seconds
e. Repeat
a
to
c
for subsequent transactions
NOTE 1
:
¡
P.
X
¡¨
mans the total number of transactions accumulated
to memory
NOTE 2:
-When the operating environment is unstable, scale
memorizes the command and will complete the command when
the environment is stable
NOTE 3:
-
Data stored in memory will be cleared when switching
to different weight unit
5.8.2 Memory Recall
Press
MR
to recall total accumulated weight from memory.
After
MR
is pressed, indicator displays
P. X
(X Means
the number of transactions accumulated), then a flashing
value. The flashing value is the total accumulated weight
stored in memory.
When the
total accumulated weight is being displayed,
MR INDICATOR
appears to indicator that the value being
displayed is the accumulated weight.
Indicator returns to normal display status after 3
seconds.
NOTE:
When scale is not at a zero weight status,
MR
will not
function. Remove all loads off the platter and try again
5.8.3 Memory Clear
Memory can be erased by:
-Press
MR
and
ZERO
simultaneously, or
