Press MODE to shift among kg
à
decimal
à
lb/oz.
à
kg weight units. Refer to 4.2.1 for internal
setting procedures.
The weight unit used before power off would
be employed when the scale is turned on again.
5.4 Turn Backlight (Op tional) On/Off
Press MODE to shift among various weight units
with backlight or without backlight.
Even though the backlight function is employed,
backlight will be automatically turned off when
a zero weight is detected and remains stable
for 5 seconds
Backlight will be automatically turned on again
when a weight is detected.
5.5 Set Displayed Value to Zero when Unloaded
A positive or negative value can be eliminated
by pressing the ZERO key. After the ZERO key
is pressed, the ZERO indicator would appear.
Refer to
SPECIFICATIONS
for maximum zero range.
5.6 Tare off the Weight of a Container
When a container is used, follow the below steps
to tare off the weight of the container and
get the net weight result.
a.
Remove all loads away from platform.
b.
Make sure that the ZERO indicator is on.
c.
Place the container on the platform.
d.
Press TARE key.
After the TARE key is pressed, the TARE
indicator would appear.
Refer to 5.2 for weighing procedures. Weight
displayed under this tare mode is the net weight
of the object. Refer to
SPECIFICATIONS
for
maximum tare range.
5.7 Clear the TARE Function
Remove all loads from platform then press TARE.
After the TARE key is pressed, the TARE
indicator would disappear.
Summary of Contents for FS-150
Page 11: ...APPENDIX Installation Diagram ...
