5.8 Bulky Weighting
The pillar can be extended for bulky weighing.
Refer to Appendix Installation diagram for
pillar extension.
5.9 Weight Memory Function
a.
To save a weight to memory and auto weight
accumulation
When weight display is stable, press M+ to
save the weight into memory. Scale displays
P. 1 and the M+ indicator appears indicating
total number of entry and the memory is
containing data.
b.
Recall accumulated weight in memory
Press MR. Scale will display the total number
of entry and the total accumulated weight
of all entries.
c.
Clear data in memory
Press and hold MR, then press TARE key after
the accumulated weight is being displayed.
Scale will display P.0 to indicate all data
in memory has been erased.
Caution
All data stored in memory will be erased if:
a.
The scale is turned off, or,
b.
The weight unit is changed.
5.10 Recharge the Scale
The scale is equipped with a built-in
rechargeable battery. When the LO-BAT
indicator appears, recharge the scale
immediately. Failure to do so may cause
unrecoverable damages to the rechargeable
battery.
The scale can remain in operation when being
recharged.
Charging is completed when the color of the
IN-CHARGE indicator turns green.
Caution:
Insert the rubber cap into the DC inlet of scale
except during battery recharging.
Summary of Contents for FS-150
Page 11: ...APPENDIX Installation Diagram ...
