UWE MII-ECO Operation Manual Download

Page: 3 / 15

INSTALLATION

This product has a manufacturer serial number. If

missing, the manufacturer

’

s warranty is invalid and

the product should be returned to your retailer for

a full refund.

1.1

CHECK

and make sure that the following items

are included:



This operation manual



Scale x 1



Plastic Platter x 1



Stainless steel platter cover (if ordered)x 1



Power adaptor x 1

Contact your dealer if any items are missing.

1.2

INSTALL

plastic platter and stainless steel

platter cover (if ordered) by pressing downward

gently.

1.3

POWER

the scale

Insert one 9V battery or 6 AA size battery

into the battery pack underneath the scale, or

Apply the external power adaptor.

Before

plugging

the

power

adaptor

into

electricity outlet, check and make sure that

the input voltage of power adaptor matches

with the output voltage of the outlet.

Summary of Contents for MII-ECO
















Search results

Summary of Contents for MII-ECO

Reviews:

Related manuals for MII-ECO

Brands by name

Popular brands

UWE MII-ECO, Operation Manual

Search results

Summary of Contents for MII-ECO

Reviews:

Related manuals for MII-ECO

Brands by name

Popular brands