By pressing the
M+
and
MC
, the follow data will
be transmitted to computer.
S/N
WT
UW
CT/N
(
NOTE 1
)
01.
78
1.0000
78
02.
580
2.0000
290
(
NOTE 2
)
0.3
+++
100
(
NOTE 3
)
03/
658
468
(
NOTE 4
)
NOTE 1
:
S/N = Serial Number, WT = Weight, UW= Unit Piece
Weight, CT/N = Count Number. An underlined
heading will be transmitted if
M+
is pressed
for the first time.
NOTE 2
:
By pressing
M+
again, the data of 2
nd
transaction
is transmitted.
NOTE 3
:
+++
donates that the count number is added to
memory by manual entry.
NOTE 4
:
By pressing
MC
, the total number of transaction,
total accumulated weight and count number are
transmitted.
A consecutive dot line sent before the
accumulated result donates the total
accumulated value.
5.16 RECHARGE THE SCALE
When the
LO-BAT INDICATOR
appears, recharge
the scale immediately.
Fail to do so will damage
the rechargeable battery inside
. Recharging
is possible during operation. The charge status
is indicated by the In-Charge indicator as
below:
RED: Rechargeable battery is being recharged.
GREEN: Rechargeable battery is completely
charged.
NOTE
: (OVC) The power pack can be taken out
from the scale and recharged with the power
adaptor. Should additional recharged power
pack is available, use it to replace the faded
one within the scale immediately.
The power pack is also equipped with the charge
status indicator. Refer to the above for