Make sure that the right unit price base
(national currency or EURO) is being employed.
If not, press
@EURO
or
@NC
to correct.
a. Press
@EURO
to employ Euro unit price base,
or,
b. Press
@NC
to employ national currency unit
price base.
c. After
@EURO
or
@NC
is pressed, the
corresponding
UNIT PRICE INDICATOR
would
appear on the
UNIT PRICE
and
TOTAL PRICE
PANEL
.
NOTE
: The power on unit price base is the default
base of the scale. Refer to
4.2.1
for power
on unit price base setting.
5.3.3 Enter the Unit Price
The unit price can be entered by one of the
following methods.
a. By
making use of
the numeric keys and decimal
keys, or,
b. By pressing the appropriate
DIRECT PLU
RECALL KEY, or,
c. By pressing the
PLU RECALL KEY
followed by
a 2-digit PLU location.
Once the unit price is entered, the price to
pay of the article will be shown on the
TOTAL
PRICE PANEL
.
NOTE
: Refer to
4.4
for more information about
PLU functions.
5.3.4 Show Price to Pay in Euro
a. Press
NC/EURO.
b. The unit will display
Euro
on the
UNIT PRICE
PANEL
and the equivalent price to pay in
EURO will be displayed on the
TOTAL PRICE
PANEL
.
c. The unit will return to national currency
mode again after about 3 seconds.
d. Should a longer time of price to pay in EURO
is needed, hold
NC/EURO
.
NOTE
:
a. The conversion function is effective only
when an appropriate country is selected
during default set up. Contact your dealer
for more information.
