UWE OAP Series, Operation Manual

b. The conversion function works only when the 

weight is stable.  

c. An audio alarm will be generated if the EURO 

unit price base is already selected when 

pressing 

NC/EURO

. 

5.4 FOLLOW-UP TRANSACTIONS 

When the present transaction is completed, 

remove all loads from the platter.  

A zero weight is now showed on the 

WEIGHT PANEL

while the previous unit price changes to zero. 

Refer 

5.3.1 

to 

5.3.4 

for follow-up 

transactions. 

5.5 HOW TO TARE OFF THE WEIGHT OF A CONTAINER 

When a container is used, follow the below steps 

to tare the weight of the container off to get 

a net weight result. 

a. Remove all loads away from platter 

b. Make sure that the 

ZERO INDICATOR

 is on. 

c. Place the container on the platter. 

d. Press 

TARE

After 

TARE

 is pressed, the 

TARE INDICATOR

 would 

appear. Refer to 

SPECIFICATIONS 

for maximum 

tare range. 

Refer to 

5.3

 for transaction weighing 

procedures. Weight displayed under this mode 

is the net weight of the subject article.  

5.4 HOW TO CLEAR THE TARE FUNCTION 

Remove all loads from platter then press 

TARE

. 

After 

TARE

 is pressed, the 

TARE INDICATOR

 would 

disappear. 

5.7 FIXED UNIT PRICE FUNCTION

The 

FIXED UNIT PRICE FUNCTION

 can be utilized 

when a same unit price is used for continuous 

transactions.