UWE OAP Series, Operation Manual

5.7.1 Employ the FIXED UNIT PRICE FUNCTION  

Follow the below steps to enable the 

FIXED UNIT 

PRICE FUNCTION

a. Press 

F 

before or after entering the unit 

price. Refer to 

5.3.2

 and 

5.3.3

 for unit 

price entering. 

b. The fixed unit price entered is now displayed 

on the 

UNIT PRICE PANEL

 and the 

FIXED UNIT 

PRICE INDICATOR

 is turned on. 

c. Should a container is used, refer to 

5.4 

to tare off the weight of it. 

d. Place an article onto the platter, the price 

to pay is displayed on the 

TOTAL PRICE PANEL

. 

e. Remove the article from platter. The unit 

price will remain on the 

UNIT PRICE PANEL.

f. Repeat 

c, d

 and 

e

 for follow-up transactions. 

5.8.2 Disable the FIXED UNIT PRICE FUNCTION  

a. Press 

F

 again to disable the 

FIXED UNIT PRICE 

FUNCTION

. 

b. The 

FIXED UNIT PRICE INDICATOR

 is now turned 

off. 

NOTE

:  Even though the 

FIXED UNIT PRICE 

FUNCTION

 is now cancelled, the unit price will 

remain displayed on the 

UNIT PRICE PANEL

. Press 

CL

 to clear or enter a new unit price before 

next transaction. 

5.8 RECHARGE THE SCALE 

The scale is equipped with a built-in 

rechargeable battery. When the LO-BAT 

indicator appears, recharge the scale 

immediately. Failure to do so may cause 

unrecoverable damages to the rechargeable 

battery. 

The scale can remain in operation when being 

recharged. Charging is completed when the 

IN-CHARGE indicator turns green.