4. INITIAL SETUP
4.1 PLACING THE SCALE
In order to obtain an accurate weighing result,
the scale must be placed on a strong and level
surface.
If required, adjust the adjustable feet
underneath scale to obtain a level position.
Refer to the bubble indicator for leveling
condition.
4.2 INTERNAL SETTING
4.2.1
Check Country Setting, Exchange Rate,
Power On Unit Price Base
This unit contains built-in exchange rates
between your national currency and EURO.
Before first time use, follow the below steps
to check and make sure that the country setting
and the EURO exchange rate against your local
currency and power on unit price base (EURO
or national currency) are both correct.
a. Turn scale off
b. Press and hold
TARE
, then turn scale on.
c. Scale displays
F.1
.
d. Press
TARE
until scale displays
F.3.
e. Press
NC/EURO
.
f. Scale shows the current country setting and
Euro exchange rate on the unit price and Total
Price Window.
g. Refer to
APPENDIX A
for country code, scale
code and exchange rate. Make sure that both
settings are correct.
h. Press
@NC
to set power on unit = national
currency, or press
@EURO
to set power on unit
= EURO.
i. Press
ZERO
to return to operation status.
CAUTION
:
Should country code or Euro exchange rate
setting is not correct, do not use this scale.
Contact your dealer immediately.
4.2.2 Select Auto Power Off Setting
The scale is equipped with
AUTO POWER OFF
FUNCTION
.
