background image

3. KEYBOARD LAYOUT AND DESCRIPTION  

 

 

1.  OFF KEY 

Press this key to turn scale off 

 

2.  ON/ZERO KEY 

Press this key to: (a) turn scale on or reset display 

value to zero; (b) move cursor to the right in function 

setup 

 

3.  MODE KEY 

Press this key to: (a) shift among different weight units; 

(b) increase value in function setup

  

 

4.  TARE KEY 

Press this key to: (a) tare off the weight of a container; 

(b) decrease value in function setup  

5.  LO INDICATOR 

This indicator appears to indicate the weight detected 

below the low limit set (Weight check function) 

 

6.  OK INDICATOR 

This indicator appears to indicate the weight detected 

within the high and low limit range (Weight check 

function)

 

 

7.  HI INDICATOR 

This indicator appears to indicate the weight detected 

above the high limit set (Weight check function) 

 

8.  AVOIRDUPOIS WEIGHT UNITS INDICATOR  

This indicator appears to indicate the weight being is 

avoirdupois weight units (lb). Two avoirdupois weight 

units are available, i.e. decimal pound (e.g. 5.62 means 

5.62 lb) and pound/ounce (e.g. 2.15.01 means 2 lb and 

15.1 ounce). 

 

9. NET INDICATOR 

This indicator appears to indicate the tare function 

is in operation and weight displayed is net weight 

 

Summary of Contents for TDW-3000













Reviews: