10
INITIAL SETUP
Select Digital Motion Filtering Function
3 parameters are available:
Filt.0 (filtering function disable)
Filt.1 (filter 1)
Filt.2 (filter 2)
Use digital motion filtering function when the operating
environment is subject to disturbances like vibration, wind
flow,
etc.
Select
higher
filter
values
for
worse
environments. Filt2 gives the slowest response compared
with other 2 parameters.
Select Auto Tare Function
2 parameters are available:
Tr-On (Auto Tare Function enable)
Tr-OFF (Auto Tare Function disable)
Under the Auto Tare Function, the first load applied to
scale will be treated as a container an d will be tared off
automatically.