64
Settings in Bypass Mode
In bypass mode, the output power adapts to the voltage or battery power.
In TC mode, the atomizer head resistance must be determined. To do this, select TC mode and
then press the fire button, so that “New Coil?” and “Same Coil?” appear on the display. If it is
a new head, confirm this using either the up button or the down button, if this is not the case.
Confirm by pressing the fire button.
Note: Please use the determination feature only at room
temperature, so that the appropriate base resistance can
be displayed in lock mode. If this is not the case, faulty
measuring results can occur which can also adversely affect
the protective functions.
UWELL Nunchaku – Using the Device
