Before You Start
Tools
To enable you to successfully assemble your product. You will require 1 x 13mm, 2 x 14mm Combination
Spanners and 1 x Screw Driver, you may also find it beneficial to have a Soft-Headed
Hammer and perhaps an Adjustable Spanner handy as this may help.
Prepare the Work Area
It is important that you assemble your product in a clean, clear, uncluttered area. This will enable you to
move around the product while you are fitting components and will reduce the possibility of injury
during assembly.
Work with a Friend
You may find it quicker, safer and easier to assemble this product with the help of a friend as some of
the components may be large, heavy or awkward to handle alone.
Open the Carton.
Carefully open the carton that contains your product, taking note of the warnings printed on the carton
to ensure that the risk of injury is reduced. Be aware of sharp staples that may be used to fasten the
flaps as these may cause injury. Be sure to open the carton the right way up, as this will be the easiest
and safest way to remove all the components.
Unpack the Components
Carefully unpack each component, checking against the parts list that you have all the necessary parts
to complete the assembly of your product.
Please note that some of the parts may be pre-fitted to major components, so please check carefully
before contacting our CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before contacting us first.
Page
5
