FIG 4
Attach the rear of the Right Hand Footplate Support Bar (6R) to the
Crank (27) by Screwing in clockwise 1 x Right Hand Pedal Hinge Bolt (60)
and 1 x Wave Washer (59). Secure with 1 x 1/2" Spring Washer (51) and
1 x 1/2" Nylon Locknut (48R).
Repeat for the left hand side, screwing in the Left Hand Pedal Hinge Bolt
& Nut (61 & 48L) anti-clockwise.
The Pedal Hinge Bolts are stamped
with L or R on the head of the bolt
for Left and Right.
Note
Attach the Footplates (11) to the Left and Right Footplate Support Bars
(6L & R) using 2 x M10 x 45mm Hex Bolts (44) and 2 x M10 Nylon
Locknuts (45) for each Footplate.
4
The Footplates are fitted with the
raised edge on the inside.
Note
FIG 3
3
59
60
48
51
6R
27
4
REAR
FRONT
6
45
11
44
Assembly
Page 19
Air
Elliptical
Trainer
Summary of Contents for Air Elliptical Trainer
Page 2: ......