EXERCISE MONITOR USER INSTRUCTIONS
CUSTOMER NOTICE
EXERCISE MONITOR CABLE CONNECTION
In most cases where there is an apparent failure of your Exercise Monitor to work, it is due to incorrect fitment
of the Exercise Monitor cable connections. So, please ensure that there is
NO GAP between the connectors on the Exercise Monitor cables when finally assembled.
For
Jack Plug
fittings, push together the Male & Female ends to make initial contact. Push again to make final
connection. When fitted correctly , the Jack Plug faces will touch each other.
For
2-Pin
fittings, ensure that you carefully line up the contacts in both connectors
and then push firmly together ensuring that the clips lock together.
Before contacting our Customer Support Team (see contact details below), please
re-check all cable connections, disconnecting and re-making where necessary.
Should you encounter any difficulty with the operation of your Exercise Monitor that is not
solved by re-connection, please return it to us at the address below for inspection.
WE REGRET THAT ARE UNABLE TO REPLACE ANY DAMAGED
OR FAULTY UNITS BEFORE INSPECTION BY US.
We reserve the right to repair or replace the Exercise Monitor at our discretion.
Beny Sports Co. UK Ltd.
Unit 8, Riparian Way, The Crossings, Cross Hills, West Yorkshire. BD20 7BW
Tel: -
01535 637711
Fax: -
01535 637722
e-mail: -
support@benysports.co.uk
CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday to Friday
BATTERY INSTALLATION
To
fit the necessary
BATTERIES - (NOT SUPPLIED)
to your Exercise Monitor, remove the
BATTERY COVER
at the
REAR
of the monitor. Carefully fit the batteries by fitting between the exposed contacts in the battery
ed with the '+' / '-' ends matching the outline on the sticker or in
the battery compartment. Failure to fit batteries correctly may result in damage to your Exercise Monitor
that is not covered by our guarantee.
PLEASE DISPOSE OF OLD BATTERIES CAREFULLY AND CONSIDERATELY.
compartment. Ensure that batteries are fitt
Page 1
3
Summary of Contents for AL16/1E
Page 2: ......
Page 22: ...Assembly Page 22...