background image

General Information

Quality

This exercise product has been designed and

manufactured to comply with the latest (BS EN 957)

British and European Safety Standards.

 

Questions

Should you encounter any difficulty with the assembly,

operation or use of your exercise product or if you

think that you may have parts missing, please DO NOT

return it to your retailer but contact us first for help and

advice, asking for CUSTOMER SUPPORT, by any of the

following means. 

Tel:- 0800 3 101 202 or 
       +44 (0) 1535 637711
Email:- support@benysports.co.uk  
Website: www.benysports.co.uk

CUSTOMER SUPPORT open from 9.00am to 5.00pm
from Monday to Friday

Beny Sports Co. UK Ltd.
Unit 8 Riparian Way, 
The Crossings Business Park,
Cross Hills, 
West Yorkshire. 
BD20 7BW

Queries

If you do have any queries, please ensure that you have

the following information ready for our Customer Support

Staff:
YOUR NAME

YOUR ADDRESS

YOUR PHONE NUMBER

PRODUCT MAKE OR BRAND

PRODUCT MODEL

PRODUCT SERIAL NUMBER

DATE OF PURCHASE

NAME OF RETAILER

PART NUMBERS REQUIRED

a). Provide parts for the purchaser to effect repair.

b). Repair the product, returned to our warehouse 

(at the purchaser's cost). 

c). Replace the product if it is deemed (by us) to be 

economical to do so.

This guarantee does not cover wear and tear on 

upholstery or consumables.

This guarantee does not cover abuse, defects caused by 

storage or use outside those intended.

If you need to advise us of a defect with your product and 

in order for us to service any requirement for replacement 

parts or repairs, we will ask for proof of purchase. Failure 

to do so will result in any claim for replacement parts or 

repairs being refused.

This guarantee, (both given and implied) applies to the 

original purchaser only, is not transferable and will be 

invalidated if used outside of the above criteria.

This guarantee is valid only in the United Kingdom and Eire.

This does not affect your statutory rights as a consumer.

 

Customer Support

Tel:- 0800 3 101 202 or 

       +44 (0) 1535 637711

Email:- support@benysports.co.uk  

Website: www.benysports.co.uk

CUSTOMER SUPPORT open from 9.00am to 5.00pm

from Monday to Friday

Beny Sports Co. UK Ltd.

Unit 8 Riparian Way, 

The Crossings Business Park,

Cross Hills, 

West Yorkshire. 

BD20 7BW

Guarantee

This product is guaranteed for 

DOMESTIC USE ONLY

 for 

a period of 

1 YEAR

 from the original certified date of

 purchase. During this period we have the right to: - 

Page 4

Summary of Contents for MCCT-2

























Reviews: