Assembly
2
Connect the lower part of the Upper Control Wire (29) to the Lower Control Wire
(30), ensuring a tight connection. Carefully lower the Handlebar Upright (2) onto
the Main Frame (7), then loosely fit the 4 x M8 x 20mm Allen Bolts (27), 4 x M8
Spring Washers (23) and 4 x M8 Curved Washers (28). Do not fully tighten at
this stage.
3
Attach both Footplates (14L/R) to the Footplate Support Bars (8L/R) using 4 x M8
x 50mm Hex Bolts (33), 4 x M8 Flat Washers (20) and 4 x M8 Locking Knobs (17)
for each Footplate. Align both Footplates in either of the 3 positions and tighten the
Locking Knobs (17) securely.
30
29
29
2
14L
14R
33
33
20
8L
8R
17
20
17
30
27
29
28
23
7
Page 1
Summary of Contents for PMCE-1
Page 2: ......
Page 19: ...Assembly Page ...