4
Assembly
Remove 8 x M8 Flat Washers (15) and the 8 x M8 x 15mm Allen Bolts (20) from the
Backrest (4) and the Seat(5). Attach the Backrest (4) and the Seat (5) to the Seat
Support (9) using 8 x M8 Flat Washers (15) and 8 x M8 x15mm Allen Bolts (20)
that were removed.
5
Attach the Seat Support (9) onto the Seat Adjuster Bracket (8), align the bolts and
secure using 2 x M8 Flat Washers (15), 2 x M8 Locking Knobs (14). Now insert the
Pin (13) into the hole in the middle of the Seat Adjuster Frame (8) and through the
Seat Support (9). Connect the Pulse Wires(24 & 25) together. Select the desired
length to allow for a slight knee bend at the furthest point of the pedaling action
and secure in place with the Seat Locking Knobs (14).
Page 1
6
Summary of Contents for PMRC-1
Page 18: ...Assembly Page 18...
Page 19: ...Assembly 42 40 Page 19...