V-fit PMRC-1, Assembly & User Manual

Before you Start

Tools

 If required, most of our products are supplied with basic tools, which will 

enable you to successfully assemble your product. However, you may 
find it beneficial to have a soft-headed hammer and perhaps an 
adjustable spanner handy as this may help.

Prepare the Work Area

It is important that you assemble your product in a clean, clear,
uncluttered area. This will enable you to move around the product
while you are fitting components and will reduce the possibility of
injury during assembly.

Work with a Friend

You may find it quicker, safer and easier to assemble this product with
the help of a friend as some of the components may be large, heavy
or awkward to handle alone.

Open the Carton.

Carefully open the carton that contains your product, taking note of
the warnings printed on the carton to ensure that the risk of injury is
reduced. Be aware of sharp staples that may be used to fasten the
flaps as these may cause injury. Be sure to open the carton the right
way up, as this will be the easiest and safest way to remove all the
components.

Unpack the Components

Carefully unpack each component, checking against the parts list that
you have all the necessary parts to complete the assembly of your
product. 
Please note that some of the parts may be pre-fitted to major
components, so please check carefully before contacting our
CUSTOMER SUPPORT team. 
In any event, please do not return the product to your retailer before
contacting us first.

Page 

4