Assembly
Overview Drawing
The free space required around
your product
Note
The foot print for this product is
1650mm x 800mm.
The assembled weight is 46kg.
Note
USING THE SAFETY KEY
You will need to install the SAFETY KEY (11) in order to operate your product.
This acts as an emergency STOP should you encounter any difficulties.
SETTING UP THE SAFETY KEY
With the product switched off, place the Safety Key (11) into the recess in the
front of the Computer Console. Extend the Safety Key chord until you can
stand with both feet on the rear of the Running Belt with your heels on the Rear
Roller, clip the chord to your clothing and take up the slack in the chord until it’s
tight. The idea is if you stumble or fall, the Safety Key will pull out and stop the
treadmill. You can test this by standing in the normal position you would use
the product, take a step backwards and the Safety Key should pull out.
Safety Area
800mm
1650mm
Page 1
0
Summary of Contents for PT141
Page 18: ...User Instructions Page 18...
Page 19: ...Page 19 Exercise Notes...
Page 21: ...Page 21 Exercise Notes...
