3
Frame Assembly
Complete the frame assembly by inserting the frame bars into
each coupler according to the color codes on the tips of each
bar. Insert the bungee cord through the tube net and place both
over the frame before completing the basic frame assembly.
Note:
The
PX-5
,
VX-5
and the
PX-7,
VX-7
have the exact
same base but vary in the number of frame pieces. All parts
are color coded for easy assembly. Simply insert the pieces
according to the corresponding colors.
To complete the circle apply
downward pressure
at this time.
This will allow the two remaining pieces to be joined together.
All parts should be bolted together at each coupler with the ¼”
bolt and lock nuts before continuing.
Tube Net Application
Once the circular frame is complete, pull the tube net with the
white bungee cord around the circle. Insert the cut end of the
bungee cord drawstring through the loop on the other end and
pull to tighten. Cut the excess cord off and tie the two ends of
the tube net together with the black tag lines on each end. Try
to keep the seam rope on the outer edge of the frame for
uniformity.
This completes the assembly for the PX-Series products.
